水泥辊压机终粉磨系统的工业化应用

介绍了水泥辊压机终粉磨系统及运行情况,与辊压机联合粉磨系统生产的水泥以及所配制的混凝土进行了对比,水泥辊压机终粉磨系统电耗大幅降低,两种水泥所配制的混凝土性能相当。     

基于端面耦合的InP基激光器/硅光波导混合集成技术研究

针对硅光子集成回路缺少实用化光源的问题,提出了一种1.55μm波段InP基FP激光器芯片、InP基PIN光电探测器芯片与硅光波导芯片集成模块的设计与制备方法。使用CMOS工艺兼容的硅光无源器件制备工艺,设计并制备了倒拉锥型端面耦合器,与锥形透镜光纤耦合效率为36.7%。采用微组装对准技术将激光器芯片与硅波导芯片耦合、UV固化胶固化后耦合效率为35.8%,1 dB耦合对准容差横向为1.2μm,纵向为0.95μm。     

射电望远镜主动面促动器的电磁辐射分析

主动面控制技术是当前大口径、高精度射电望远镜广泛使用的主动补偿技术,其包含的促动器在补偿面形精度的同时也辐射电磁波并影响射电天文观测。文中结合目前研究现状,对极低电磁辐射要求下的促动器进行辐射源分析,重点针对促动器控制板上信号建立数学模型,并选取晶振回路计算,合理设定印制板及器件的参数,通过Ansys 软件进行频域有限元分析,得到控制板晶振回路的辐射结果和规律。用近场测试验证了文中方法的有效性。该研究为促动器控制板的电磁兼容优化设计提供了验证方法,为降低主动面控制系统的电磁辐射奠定了基础。     

以用户为中心的可见光通信协作传输中训练资源分配算法

以用户为中心的可见光通信协作传输是近年来出现的新架构,这导致虚拟小区之间出现重叠。为避免导频污染问题,每个虚拟小区中的光接入点(AP)或者虚拟小区中选择相同AP的用户发送的训练序列应该是正交的。针对可见光通信中以用户为中心的协作网络,研究训练资源的正交分配问题,提出了一种新的导频分配算法,联合导频分配和用户选择问题,以期最大限度地增加虚拟小区内可被接入的用户数。分析和仿真结果表明,该导频分配方案可以有效改善导频污染问题,提高训练资源利用率,并且相比已有的导频分配方案,性能有所改进。     

Scalable Clock Synchronization Analysis: A Symmetric Noncooperative Output Feedback Tubes-MPC Approach

In the cyber-physical environment, the clock synchronization algorithm is required to have better expansion for network scale. In this paper, a new measurement model of observability under the equivalent transformation of minimum mean square error (MMSE) is constructed based on basic measurement unit (BMU), which can realize the scaled expansion of MMSE measurement. Based on the state updating equation of absolute clock and the decoupled measurement model of MMSE-like equivalence, which is proposed to calculate the positive definite invariant set by using the theoretical-practical Luenberger observer as the synthetical observer, the local noncooperative optimal control problem is built, and the clock synchronization system driven by the ideal state of local clock can reach the exponential convergence for synchronization performance. Different from the problem of general linear system regulators, the state estimation error and state control error are analyzed in the established affine system based on the set-theory-in-control to achieve the quantification of state deviation caused by noise interference. Based on the BMU for isomorphic state map, the synchronization performance of clock states between multiple sets of representative nodes is evaluated, and the scale of evaluated system can be still expanded. After the synchronization is completed, the state of perturbation system remains in the maximum range of measurement accuracy, and the state of nominal system can be stabilized at the ideal state for local clock and realizes the exponential convergence of the clock synchronization system.      

镀液温度实时控制系统的设计与实现

针对镀液温度变化的非线性和滞后性,设计了采用专家规则的镀液温度实时控制系统。该系统在实时监测的基础上,构建了综合评判镀液温度偏差和镀液温度偏差变化率的专家规则,实现了镀液温度的自适应快速调节。仿真分析结果表明,该系统克服了非线性和滞后性的不良影响,能够实现镀液温度的实时控制。     

Adaptive neuro-fuzzy algorithm applied to predict and control multi-phase flow rates through wellhead chokes

A Takagi-Sugeno adaptive neuro-fuzzy inference system (TSFIS) model is developed and applied to a dataset of wellhead flow-test data for the Resalat oil field located offshore southern Iran, the objective is to assist in the prediction and control of multi-phase flow rates of oil and gas through the wellhead chokes. For this purpose, 182 test data points (Appendix 1) related to the Resalat field are evaluated. In order to predict production flow rate (Q_L) expressed as stock-tank barrels per day (STB/D), this dataset includes four selected input variables: upstream pressure (Pwh); wellhead choke sizes (D64); gas to liquid ratio (GLR); and, base solids and water including some water-soluble oil emulsion (BS&W). The test data points evaluated include a wide range of oil flow rate conditions and values for the four input variables recorded. The TSFIS algorithm applied involves five data processing steps: a) pre-processing, b) fuzzification, c) rules base and adaptive neuro-fuzzy inference engine, d) defuzzification, and e) post-processing of the fuzzy model. The developed TSFIS model for the Resalat oil field database predicted oil flow rate to a high degree of accuracy (root mean square error = 247 STB/D, correlation coefficient = 0.9987), which improves substantially on the commonly used empirical algorithms used for such predictions. TSFIS can potentially be applied in wellhead choke fuzzy controllers to stabilize flow in specific wells based on real-time input data records.     

氯碱企业快速熔断器运行状况调查报告

以2018年58家氯碱企业供电、整流技术与设备现状调查数据为依据,阐述了国内氯碱企业中快速熔断器的运行状况。调查数据中包括50家氯碱企业的快速熔断器的基本运行数据、投运时间及设备来源等。汇总了各企业在氯碱生产中使用快速熔断器时遇到的问题、发生的故障甚至酿成的生产事故及对氯碱生产造成的影响。并分析了事故发生的原因,提出了预防及解决措施,总结了事故处理经验,旨为氯碱生产提供参考依据。     

Sparse non-convex Lp regularization for cone-beam X-ray luminescence computed tomography

Cone-beam X-ray luminescence computed tomography (CB-XLCT) is an attractive hybrid imaging modality, and it has the potential of monitoring the metabolic processes of nanophosphors-based drugs in vivo. However, the XLCT imaging suffers from a severe ill-posed problem. In this work, a sparse nonconvex L_p (0?p?L₁ regularization. Further, an iteratively reweighted split augmented lagrangian shrinkage algorithm (IRW_SALSA-L_p) was proposed to efficiently solve the non-convex L_p (0?p?p-values (1/16, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8) in both 3D digital mouse experiments and in vivo experiments. The results demonstrate that the proposed non-convex methods outperform L₂ and L₁ regularization in accurately recovering sparse targets in CB-XLCT. And among all the non-convex p-values, our L_p(1/4?p?相似文献   

负压差对固体进料系统压力分布和气固两相流动规律的影响

A series of experiments on a solid feed system was performed to investigate the effects of negative pressure gradient on the gas-solid flow pattern and hydrodynamic characteristics. Based on the non-fluidized gas-solid two phase flow and particulate mechanics in the standpipe, a method for predicting the pressure of the air passing through the recycle chamber and the pressure drop through the loop seal slit in these systems is also presented. The predicted pressure profile along the negative pressure gradient from the proposed model exhibits a good agreement with the experimental data. The experimental data show that the gas flow in the standpipe is always upward in the negative pressure gradients, while the direction of gas cannot be changed by the drag force. The solid flow rate, the materiel bed height in the recycle chamber (Hf), the pressure drop across the slit (△Pg） decrease with an increasing negative pressure gradient. At a given negative pressure gradient, the superficial gas velocity through the recycle chamber of the loop seal does not affect the pressure drop in standpipe. It increases with an increasing negative pressure gradient.